ss3MB
INNOVATIVE BREAKTHROUGH
A new, “Innovative Breakthrough” in the use of an engineered, green, non-asphaltic Modified Macro Molecular Binder (SS3MB). When combined with water, recycled asphalt millings (RAP) or dense grade aggregates at ambient temperatures, it creates a load bearing structure. SS3MB is a revolutionary green way to redeploy and reuse current road assets to renew road structures with superior performance at competitive cost.
About Our MODIFIED MACRO MOLECULAR
Modified macro molecular binder SS3MB is a non-asphaltic modified binder that comes in a concentrated liquid solution. When appropriately combined with water, local soils or sand, it can be turned into durable roads, trails, path, dust control.
How it Works
SS3MB Works To Create Structures That Bind Asphalt Millings Known As (RAP) “Recycled Asphalt Pavement” Or Dense Grade Aggregate Materials Into A Semi-Flexible, Load Bearing Structure To Be Sealed Or Overlaid.
Easy to Use
SS3MB Is Extremely Easy To Mix and Requires No Heat During The Mixing or Application Process
Simply mix SS3MB with asphalt millings and water. Mixed material can be stockpiled for periods of time before being used.
No Mess During Application
Cleans Up With Water
SS3MB works through any conventional paving equipment with no heat and easy cleanup without the use of any special equipment, solvents or high pressure.
Alternative to Petroleum Based
Paving Binders
⦾ No Petroleum Additives
⦾ No Capital Investment
⦾ No Heat – No Energy = No VOC’s (Volatile organic compounds)
⦾ Substantial Savings vs Conventional Paving
⦾ Low Carbon Footprint
⦾ Environmentally Friendly
⦾ No Time Restraints
Requirements For
Road Application
⦾ Soil samples are required to optimize the product effectiveness.
⦾ Soil composition is mixed with the appropriate quantity of mixed SS3MB solution to achieve complete hydration.
⦾ The leveled and graded mixture is then fully compacted to create the optimal density achievable.
⦾ The curing process is accomplished by natural drying directly related to ambient temperature.
⦾ Our SS3MB sealer is then spray applied to the exposed surface to seal it from moisture penetration.
What Makes Our
SS3MB Superior
⦾ SS3MB is a custom engineered solution that can be used in various soils and sands.
⦾ Solution can turn dirt or sand roads similar to asphalt roads.
⦾ No petroleum additives.
⦾ No heat – No VOC emissions.
⦾ No time restraints.
⦾ Product is more cost effective than using concrete or asphalt.
⦾ SS3MB concentrate can be stored in shipping 250 gallon totes (946.3 liters) for in excess of one year.
⦾ Product has been used in diverse and extreme weather conditions.
⦾ Works easily with water for use and cleanup.
What Problems Does
SS3MB Solve?
⦾ Dust and erosion control problems.
⦾ No pollution due to its environmentally friendly, non- toxic, and non-polluting compounds.
⦾ SS3MB saves money while building roads because it allows the usage of existing soils found in the area.
⦾ SS3MB is safe and easy to work with because it works well with local water.
⦾ Easy and safe to apply thus providing task reduction.
⦾ Environmental alternative to the use of bitumen products.
⦾ SS3MB is 100% Green and leaves no carbon footprint.
Technical Specs
Resiliency
⦾ The SS3MB application is a strong, durable, yet slightly flexible sustainable composition structure.
⦾ SS3MB requires a sealant overlay surfacing such as chip sealing, micro surfacing, or Hot Mix Asphalt overlay.
⦾ The right sealing combination could lead to potential LEED (Leadership in Energy and Environmental Design) qualified surface points.
Sample of Sub-grade Failure
& Pulverized Base Course
& Pulverized Base Course
“ROADS WEAR FROM THE TOP DOWN AND FAIL FROM THE BOTTOM UP.”
Requirements for
Road Application
⦾ Soil samples are required to optimize the product effectiveness.
⦾ Soil composition is mixed with the appropriate quantity of mixed SS3MB solution to achieve complete hydration.
⦾ The leveled and graded mixture is then fully compacted to create the optimal density achievable.
⦾ The curing process is accomplished by natural drying directly related to ambient temperature.
⦾ Our SS3MB sealer is then spray applied to the exposed surface to seal it from moisture penetration.
Pricing in Three
Easy Steps
In order to provide pricing we need the following project information:
Usage of SS3MB, such as: roads, slabs, soil stabilization, etc.
Geotechnical testing of the working area:
(a) soil composition
(b) soil gradation
(c) bearing pressure
(d) measurements of the treated area or of the overall project.
With this information we can then classify the soil or sand type in order to approximate the SS3MB concentrations.
Product Shipping
⦾ SS3MB is shipped in 250 gallon totes (946.353 liters) in a concentrated solution.
⦾ Weight: 2,500 pounds each (1,133.98 Kilos)
⦾ Dimensions: 40” x 48” x 42” 101.6×121.92×106.68 (centimeters)
⦾ SS3MB has a shelf life over one year. Product should not be allowed to freeze.
⦾ Product Ships from any seaport in the USA.
SEND US A MESSAGE
